Beautiful and well made wooden cutting board. Very heavy and the size is as described.

I ended up having to purchase this board two times. The first one was unfortunately packed with a single 3' sheet of packing paper in the box with this 15+ pound slab of wood and arrived with multiple dents on one side that were severe enough that the board wouldn't lay flat with that side down. Fortunately the return/replacement process was fairly painless and the second board arrived unscathed.Shipping issues aside, this is a wonderful work surface for cutting tasks. It's heavy and flat enough that typical activity won't have it sliding around on the counter and after years of using smaller plastic cutting boards, it was positively luxurious to have such a large work area.The board arrived a bit dry, but a quick wash and pass with some mineral oil brought out the color and natural luster of the teak (as well as the natural warm spicy smell of the wood). Mine has a lot of variation between the individual pieces with some knots and dramatic streaks making up the finished board and is overall quite appealing to look at.Cleaning and care are simple, usually just requiring soap and warm water, but I admit that I don't cut meats on this board. The size does make it a tight fit in most sinks, but that should be the only hurdle.Highly recommended if you have the space for it.

I’m an intermediate/advanced amateur cook and have been cooking since a small boy—I’m 62. I am well versed and experienced at all types of cooking, curing meats, pickling, baking artisanal breads, sous vide, pressure cooking and canning, butchering, smoking, grilling, dry aging, etc. I have $thousands in kitchen equipment and an investor in 3 local pub/restaurants. I’m a retired aerospace engineer/rocket scientist an Air Force Space Operations Officer. I’m also an amateur woodworker and can make boards, though it is some work to do it correctly. I’ve said all that to say I’m very familiar with quality equipment including kitchen equipment e.g. even cutting boards of which I have several in wood and plastic. I recently bought a house w/ a much larger kitchen and lots of counter space. The tops are granite tile so flour, etc. gets in the grout making it harder to clean. I plan to replace the large island top with a smooth solid surface but I decided to purchase a large cutting board for now (which I’ll use later as well). This will allow me to cut veggies, cooked meat, etc. but also to work dough. I’m well aware of John Boos boards and their quality…and price! I was ready to purchase a Boos board until I saw this board review on ATK as their winner. I have a great respect for their opinions and testings. I purchased the 18” x 24” x 1.5” board flat on one side and with a juice channel on the other. It arrived today. What a beautiful board. I showed my wife who does not share my appreciation for quality kitchen equipment and her response was “ That’s pretty!” More importantly, the board is very well constructed. It is perfectly flat and fairly well oiled. I did oil it as recommended, though it only took 3 coats and not very heavy—less that the 4-5 in the instructions say it might take. Mine has no cracks whatsoever. I do have two very small dents on the smooth face but it was very well packaged. I can only assume it was accidentally damaged before packaging. I could have returned it but decided not to do so as I’m sure there will be many other battle scars before I’m done with it—when I die! This is the best board I own. It is large, which is just what I wanted—a board with real estate so I have room to work. It is heavy and stays in place. I can see why ATK gave this their top rating. I am VERY pleased!

I can't remember how much time I spent researching cutting boards before I settled on this one, although it is safe to say, it was too much time....I should have stopped looking when I first came upon the Proteak board...but I kept looking, and learning, and always ended up coming back to this board.To add to my confusion, there is the long running debate between end grain and edge grain boards, not to mention the wood type war that rages among cutting board effecinatos. To say that it can get confusing is an understatement.Needless to say, when I came upon the Proteak cutting board, I was impressed. I was impressed with the size, the quality, the appearance, and the price. Yep. The price is quite impressive, but if you want a cutting board that will instantly become your favorite board, it is worth the cost....and believe me when I tell you that there are many similar cutting boards out there that cost quite a bit more than this one.First, let me explain the differences between End Grain and Edge Grain...Edge grain (long strips of wood, laying side by side to create your cutting board surface) absorbs less and takes less wood to make a board so they are often more cost effective.End grain (smaller blocks of wood, with the age rings showing, placed side by side to create a cutting board surface that consists of many different squares. Butcher Block boards are made from end grain wood. End grain is considered, by some, to be the least abrasive cutting surface for your knife edge and has been described as "self healing", which means that the small cuts on the surface of the board may close back up to some degree. This happens primarily because end grain wood is more moisture absorbent. Personally, I am not sure if that is a good thing or a bad thing. I guess it is a matter of personal preference. I chose the Edge Grain because I didn't like the idea of all the bacteria that can quickly grow in an end grain board.The wood type debate is one I won't get in to. While many people prefer hardwood cutting board, such as Oak, Maple, Teak, even Walnut and and Cherry, there are others who prefer soft wood, such as Fir, Hinoki Cypress and Pine woods. Again, I think it is a matter of personal preference.I chose a hardwood once again because of the possible bacteria build up factor of soft wood. Teak is considered to be an excellent hardwood for cutting boards, and, face it, the teak used to make this board is just plain gorgeous.Then there are the various cutting board styles. Cutting boards with feet are not intended to be used on both sides so you end up with half the cutting surface. If you do you switch the feet you can end up with holes in the board that absorb bacteria.Don't forget to pay attention to thickness no matter who you buy a board from. I didn't want a board thinner than 1.5" and would not want a board over 3" simply because of it's weight...but that's me...Which is what brought me to this 1.5" thick, 20" x 15" edge cut, Proteak cutting board. I am an old woman, and I have had more than my share of cutting boards since I first started cooking way back in 1970. I currently have a monster of an end cut butcher block cutting board sitting dormant on my cook book shelf. It weighs a ton, has no handles and is only usable on one side because some genius thought it was better to put feet on the thing than to notch out handles along the edge to make it easier to lift. And...I have been treating that board with various wood oil products for nearly ten years now, and it still sucks up oil like a sponge. If it sucks up oil, one can only imagine what it would do with the liquids from fish or meat. No thanks.My new Proteak has satiny smooth, usable surface on both sides, and handy notched out handles that make it easy for my arthritic old hands to lift and move from place to place. How nice is that? But, the main thing I love about this board is it's size. Don't wast your money on anything smaller than a 15" x 20" board if you intend to do any serious chopping. The larger cutting surface is just so nice...And then there is it's appearance. It is lovely! So lovely, in fact, that it has become a regular at our dinner table. I know that over time, my cutting board will develop it's fair share of battle scars. That's what cutting boards are for, but I am confident that those scars will only add to it's character and make me love it even more than I already do. And, keep in mind that both sides of this board are usable. I have been doing the majority of my chopping on one side, and keeping a "pretty" side for serving and storage. My board stands along the wall on my kitchen counter, close by the stove for easy access, but out of the way when not in use. And it looks lovely standing there!All wooden cutting boards require proper care and feeding, and I purchased products that are reportedly among the best to help care for the wood and protect its surface, and with a little bit of love and effort, I am confident...

This is a serious kitchen tool, not something that should be stored away and gotten out for each use. It's beautiful enough to display full-time on a work counter, heavy and very stable, and large enough to chop, slice, and prepare food without having it flying all over the room. Like all such professional-grade equipment, it deserves care and maintenance. I treat mine with food-grade mineral oil, then wax it with food-grade beeswax to keep it looking like new and to help it repel all moisture. This board is too big to immerse in a sink, nor should you, for immersion can weaken the glue joints. Simply wash it off, wipe it dry, and retreat it once or twice a month. It's the best cutting board I've ever used, fully worth its price, which is not minimal.